Speaker Tracking - Cisco TelePresence SX20 User Manual

54
Camera

Speaker Tracking

To enable Speaker Tracking, tap Camera, in the upper
right corner.
Tap anywhere outside the menu to exit.
To deactivate Speaker Tracking, repeat the procedure.
Activate the Speaker Tracking feature by tapping the
button in the upper right corner.
About Speaker Tracking
Systems equipped with a speaker
tracking camera system use two
cameras working together with
a built-in microphone array. The
system will track and show the
person speaking so that you won't
have to use the Camera Control
menu or Camera Presets to zoom in
and out.
When speaker tracking has been
activated, the camera position
presets will still be available.
However, if you tap a camera
position preset while in speaker
tracking mode, one of the cameras
will respond accordingly and the
speaker tracking will be deactivated.
Activate speaker tracking as shown
on this page again, if needed.
Note S
peaker tracking will not work if
the microphones are muted.
Speaker tracking may be expanded
to include the Snap to Whiteboard
feature, as outlined on the following
page.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.