Manage Selfview; About Selfview - Cisco TelePresence SX20 User Manual

58
Camera

Manage Selfview

Outside a call:
Tap Camera.
In a call:
Tap the
selfview
avatar.
Pan
Tilt
Zoom
Tap Selfview
to turn it on, if needed.
You may now resize the selfview
image (see the following
page for more), or control the
camera's pan, tilt and zoom (see
the previous page for more).
You may now switch
the selfview off, maximize
or minimize it, or select
Camera to gain access to
the camera control (see the
previous page for more on
camera control).
Tap anywhere outside the
menu to exit.
Tap anywhere outside the
menu to exit.

About Selfview

The Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture).
The position of Selfview PiP can be
changed if you wish—see "Move
the Selfview PiP" on page 60 for
details on this.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.