Fixture Running Hour Display; Additional Operating Help - Blizzard Lighting Puck Fab5 Manual

To Show the Fixture Running Hours:
1.) Select
Menu Conventions
Addr
= "ADDR," DMX Address Set/Adjust
ChNd
= "CHMD," Channel Mode Adjust
3 /5 /12 Ch
SLNd
= "SLMD," Slave Mode Adjust
NASt
SLAv
StbY
SHNd
Sou1
Sou2
Sou3
CoLo
AUto
FAdE
StCo
NANu
= "MANU," Manual Color / White Point Adjustment Mode.
REd
GrEE
bLuE
ANbE
UhIt
FhrS
= "FHRS," Displays Fixture Running Hours
tESt
= "TEST," Test Mode.
The Puck™ Fab5 User Manual Rev. A
FhrS
from the control panel, then hit <EnTER> to confirm.
= "3 Ch," 3/5/12-Channel DMX Mode
= "MAST," Master, set the unit to Master Mode.
= "SLAV" Slave, set the unit to Slave Mode.
= "STBY," Standby, unit is in Slave with no Master Fixture.
= "SOU1," Sound Active 1, Scenes fade slowly when there is no audio.
= "SOU2," Sound Active 2, Independent slow fade of inner/outer LED's.
= "SOU3," Sound Active 3, Scenes black out when there is no audio.
= "COLO," Color Preset Mode.
Co XX
= "CO 1 - CO31," Color Preset X.
= "AUTO," Auto (Color Snap) Mode.
= "FADE," Color Fade Mode.
SP X
= "SP 1 - SP 8," Fade Speed 1-8 (Fast <-> Slow)
= "STCO," Color Strobe Mode.
Co XX
= "CO 1 - CO31," Color Preset X.
= "RED," Adjust Red Intensity from 0 to 255.
= "GREE," Adjust Green Intensity from 0 to 255.
= "BLUE," Adjust Blue Intensity from 0 to 255.
= "AMBE," Adjust Amber Intensity from 0 to 255.
= "WHIT," Adjust White Intensity from 0 to 255.
Page 11
Copyright (c) 2012 Blizzard Lighting, LLC