Sony MFM-HT75W Owners Man page 763

Identifying parts and controls
See the pages in parentheses for further details.
Front of the LCD display
5
Side view of the LCD display
qs
Rear of the LCD display
A Remote control sensor
B Light sensor (page 31)
C 1 (power) switch (page 13)
D 1 (power) indicator (pages 13, 31)
1
E Stereo speakers (page 30)
2
F MENU button (page 18)
G CH+/– buttons (page 17)
4 3
H M/m and VOL+/– (volume control) buttons
6
I
7
8
9
0
J
qa
K
L Headphones jack (page 30)
M Connector cover (page 10)
This sensor receives a signal from the remote control.
Be sure not to cover the sensor with papers, etc.
This sensor measures the brightness of the surrounding area.
Be sure not to cover the sensor with papers, etc.
Press to turn the display on or off.
The power indicator lights up in green when the display is
turned on, and lights up in orange when the display is in the
power saving mode. Also, the power indicator lights up in red
when the display is in the standby mode or the Sleep timer is
activated.
These speakers output the audio signals as sound.
Press to turn the menu screen on and off.
Press to change the TV channel.
(pages 18, 30)
Use to select the menu items and to make adjustments, and
also display the "Volume" adjustment bar to control the
volume.
(input select)/OK button (page 13, 18)
This button functions in two ways.
As the button, this button switches the input signal
between PC 1, PC 2, TV, VIDEO 1, and VIDEO 2 when two
computers and two pieces of video equipment are connected.
As the OK button, this button activates the selected menu item
or adjustments made using the M/m buttons 8.
(PinP) button (page 27)
Press to switch the "PIP" (Picture In Picture) setting.
Each time you press this button, the PIP setting changes as
follows.
PIP On t PIP Off t PIP On...
(Picture Mode) button (page 31)
Press to switch the Picture Mode.
This jack outputs audio signals to the headphones.
Remove this cover when you connect cables or cords.
qd
7