Sony MFM-HT75W Owners Man page 800

M Connector cover (page 9)
Remove this cover when you connect cables or cords.
Rear of the LCD display
qf
qg
qh
1 2
PC 1
2
VIDEO 2 IN VIDEO 1 IN
1
ql
2
N AC IN connector (page 12)
This connector connects the mains lead (supplied).
O Security Lock Hole
The security lock hole should be used with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
qj
qk
1
PC 2 VHF/UHF
1
w;
2
P PC 1 connectors
1 DVI-D input connector (digital RGB) for PC 1
(page 9)
This connector inputs digital RGB video signals that
comply with DVI Rev.1.0.
2 Audio input jack for PC 1 (page 9)
This jack inputs audio signals when connected to the
audio output jack of a computer or other equipment
connected to PC 1.
Q PC 2 connectors
1 HD15 input connector (analog RGB) for PC 2
(page 9)
This connector inputs analog RGB video signals (0.700
Vp-p, positive) and sync signals.
2 Audio input jack for PC 2 (page 9)
This jack inputs audio signals when connected to the
audio output jack of a computer or other equipment
connected to PC 2.
R VHF/UHF jack (page 11)
This jack inputs a signal from an antenna.
S VIDEO 2 jacks
1 Composite/S video input jacks for VIDEO 2
(page 11)
These jacks input composite video or S video signals.
When you connect video equipment to both composite
video input and S video input jacks, the signal from the S
video jack is displayed.
2 Audio input jacks for VIDEO 2 (page 11)
These jacks input audio signals when connected to the
audio output jacks of a VCR or other equipment
connected to VIDEO 2.
T VIDEO 1 jacks
1 Y/P /P Component Video input jacks for
B R
VIDEO 1 (page 10)
These jacks input Y/P /P
B
C /C , Y/B-Y/R-Y, or Y/P
B R
2 Audio input jacks for VIDEO 1 (page 10)
These jacks input audio signals when connected to the
audio output jacks of a DVD player or other equipment
connected to VIDEO 1.
Component Video signals (Y/
R
/P ).
B R
7
GB