Sony MFM-HT75W Owners Man page 818

x Automatic picture quality adjustment
function (for PC 2 only)
When the display receives an input signal, it automatically
adjusts the picture's position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 32).
If the automatic picture quality adjustment function of this
display seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal (See "Auto Adjust" below).
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives a previously input and
registered input signal.
x Making further automatic adjustments to
the picture quality for the current input
signal (Auto Adjust) (for PC 2 only)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "Auto Adjust" and
press the OK button.
Make the appropriate adjustments of the screen's phase, pitch
and horizontal/vertical position for the current input signal
and store them.
x Adjusting the picture's sharpness manually
(Phase/Pitch) (for PC 2 only)
You can adjust the picture's sharpness as follows.
1 Set the resolution to 1280 × 768 (MFM-HT75W), or
1280 × 1024 (MFM-HT95) on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
6 Press the M/m buttons to select "Phase" and press
the OK button.
The "Phase" adjustment menu appears on the screen.
7 Press the M/m buttons until the horizontal stripes
are at a minimum.
(Screen) and
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9 Press the M/m buttons to select "Pitch" and press
the OK button.
The "Pitch" adjustment menu appears on the screen.
10 Press the M/m buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Click [END] on the screen to turn off the test pattern.
(Screen) and
GB
25