Identifying Parts And Controls - Sony MFM-HT75W Owners Man

For customers in the United States
This product contains mercury. Disposal of this product may be
regulated if sold in the United States. For disposal or recycling
information, please contact your local authorities or the
Electronics Industries Alliance
(http://www.eiae.org).
Installation on a wall or a mounting arm
If you intend to install the display on a wall or a mounting arm, be
sure to consult qualified personnel.

Identifying parts and controls

See the pages in parentheses for further details.
Front of the LCD display
5
Side view of the LCD display
qs
6
A Remote control sensor
B Light sensor (page 35)
C 1 (power) switch (page 12)
D 1 (power) indicator (pages 12, 34)
E Stereo speakers (page 34)
F MENU button (page 15)
G CH+/– buttons (page 14)
H M/m and VOL+/– (volume control) buttons
1
2
I
4 3
J
6
7
8
K
9
L Headphones jack (page 34)
0
qa
This sensor receives a signal from the remote control.
Be sure not to cover the sensor with papers, etc.
This sensor measures the brightness of the surrounding area.
Be sure not to cover the sensor with papers, etc.
Press to turn the display on or off.
The power indicator lights up in green when the display is
turned on, and lights up in orange when the display is in the
power saving mode. Also, the power indicator lights up in red
when the display is in the standby mode or the Sleep timer is
activated.
These speakers output the audio signals as sound.
Press to turn the menu screen on and off.
Press to change the TV channel.
(pages 15, 34)
Use to select the menu items and to make adjustments, and
also display the "Volume" adjustment bar to control the
volume.
(input select)/OK button (page 12, 15)
This button functions in two ways.
As the button, this button switches the input signal
between PC 1, PC 2, TV, VIDEO 1, and VIDEO 2 when two
computers and two pieces of video equipment are connected.
As the OK button, this button activates the selected menu item
or adjustments made using the M/m buttons 8.
(PinP) button (page 30)
Press to switch the "PIP" (Picture In Picture) setting.
Each time you press this button, the PIP setting changes as
follows.
PIP On t PIP Off t PIP On...
(Picture Mode) button (page 35)
Press to switch the Picture Mode.
This jack outputs audio signals to the headphones.
qd