Start Screen And List Of Programs; Programs; Run Or Configure Driver Control - Hexbug VEX IQ User Manual

Start Screen and List of Programs

Programs

The Programs Screen of the Robot Brain is the first screen displayed after turning on the
Robot Brain, and will contain a list of all programs that have been downloaded to it. The
default program is Driver Control, which allows you to use and control up to eight Smart
Motors and four Sensors.
If additional programs have been downloaded to the Robot Brain, use the Up/Down arrows
to navigate between programs. The currently selected program will be highlighted; to run the
selected program, press the Check button.
Use Up/Down arrows to highlight Driver Control, then press the Check button.

Run or Configure Driver Control

Programs › Driver Control
The Driver Control program is unique in that it contains the ability to customize the way it
runs. This program is the default program loaded onto the Robot Brain.
When selecting the Driver Control program from the Programs Screen, two additional
options are presented: Run or Configure. Use the Up/Down buttons to select the Run option,
and press the Check button to begin running this program with the default settings.
Use Up/Down arrows to highlight Run, then press the Check button.
100
Programs
Driver Control
Autopilot
Select Settings
Driver Control
Run
Configure
Select Exit