HP Pavilion Maintenance And Service Manual page 74

4. Remove the tape (1) covering the display panel connector, disconnect the connector (2) from the display
panel, and then remove the panel (3).
5. If it is necessary to replace the hinge brackets, remove the Phillips M2.0x3 screw (1) from the top and
two Phillips M2.0x3 screws (1) from the bottom of each hinge bracket, remove the three Phillips M2.5x3
screws (2) from each hinge, and then remove the hinge brackets (3).
6. If it is necessary to replace the camera module:
CAUTION:
when not handled carefully.
64 Chapter 6 Removal and replacement procedures for authorized service provider parts
Handle the module with caution. This module has a thin profile and is susceptible to damage