Memory Module - HP Pavilion Maintenance And Service Manual

Memory module

Description
Memory
2 GB 2133 MHz 1.2 v DDR4 shared
4 GB 2133 MHz 1.2 v DDR4 shared
8 GB 2133 MHz 1.2 v DDR4 shared
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
various system problems.
To update BIOS:
1. Navigate to http:\\www.hp.com.
2. Select Support , and then select Software & drivers.
3. In the Enter my HP model number box, type the computer model information, and then select Find my
product.
-or-
Select Identify now.
4. Select the link for the computer model.
5. Select the language and the operating system.
6. Under the downloads heading, select the BIOS link.
7. Select the link for the most recent BIOS.
8. Select the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Battery (see
b. Optical drive (see
c. Base enclosure (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
38 Chapter 6 Removal and replacement procedures for authorized service provider parts
Failure to update the computer to the latest BIOS prior to installing new memory may result in
Battery on page
Optical drive on page
Base enclosure on page
30)
31)
33)
Spare part number
851379-005
820569-005
820570-005