Cisco 8821 Manual page 148

• Enter admin as the Username and the string defined for the Admin Password for Password, then select Submit.
For out of box / factory reset, the Admin Password is temporarily set to Cisco.
•
To create a configuration file to be used for all Cisco Wireless IP Phone 8821 and 8821-EX, browse to the admin
webpage of the out of box or factory defaulted Cisco Wireless IP Phone 8821 or 8821-EX.
• Select WLAN menu option then configure the necessary profiles where the SSID, 802.11 Mode, Security Mode, etc.
must be specified.
•
For EAP-TLS, the User Certificate can be set to User Installed or Manufacturing Installed (will be defaulted to
Manufacturing Installed).
• For PEAP with Server Validation or EAP-TLS, upload the Server (Root CA) Certificate.
•
The Server (Root CA) Certificate does not need to be configured at the WLAN Profile level.
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
148