Cisco 8821 Manual page 122

•
A Wireless LAN Profile Group can then be created where the Name, Description, and Wireless LAN Profiles are
specified.
•
Up to 4 Wireless LAN Profiles can be added to a Wireless LAN Profile Group.
•
Select Save once the Wireless LAN Profile Group configuration is complete.
•
Once the Wireless LAN Profile Group has been created, it can be applied to a Device Pool or an individual Cisco
Wireless IP Phone 8821 and 8821-EX.
•
To apply a Wireless LAN Profile Group to a device pool, navigate to System > Device Pool within the Cisco Unified
Communications Manager's Administration interface.
•
Create a Device Pool as necessary and put the desired Cisco Wireless IP Phone 8821 and 8821-EX into this Device
Pool.
•
Once the Device Pool has been created, configure the Wireless LAN Profile Group then select Save.
•
Once the Wireless LAN Profile Group has been applied to the Device Pool, select Apply Config for the Cisco Wireless
IP Phone 8821 and 8821-EX to download the Wireless LAN Profile Group configuration.
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
122