Advertisement
66
V. FRAME
5. Pry off the cotter pin and remove the pad B from the
caliper B.
6. Remove the pad A from the caliper A by lightly tapping the
head of the caliper.
(4) Pad B
(5) Cotter pin
Master cylinder
l. Loosen off the oil bolt and disconnett the brake hose from
the master cylinder.
2. Loosen off the bolts securing the master cylinder holder;
remove the master cylinder from the handlebar.
3. Loosen the brake lever pivot bolt to remove the brake lever
from the master cylinder.
4. Remove the boot and boot stopper [rom the cylinder,
taking care not to damage the boot. Remove the snap ring
using "Snap Ring Pliers (Tool No. 07914-32300).
[' ISo ;)-1/
'-I}
lYlaSIer cYlmaer
(2) Snap ring pliers
5. Remove the piston, primary cup, spring and check valve
[rom the master cylinder in this order.
NOTES:
a. Apply air pressure oi 2-3 kgJsq. cm (28-43 psi.) to the
brake base joint to remove the primary cupo
b. Take care not to damage the check valve when removing
it.
t'1g. 5-IH
(I) Primary cup
Advertisement
