Advertisement
Il
111. INSPECTION AND ADJUSTMENT
8. Adjust the synchronization so the right and left throttle
valve will both move the same amount when the throttle
grip is moved slightly.
The adjustment can be made by turning the throttle cable
adjuster.
NOTE:
Upon adjustment, tighten the lock nut securely and snap
the throttle grip three or four times to recheck the
synchronization.
9. After completing the adjustment, check and adjust the free
play of the throttle grip.
lO. Remove the vacuum gauges and install the plugs and fuel
tank.
Fig. 3-16
(1) Cable adjuster
(2) Lock nut
5. THROTTLE CABLE
Check the free play of the throttle grip. It should be 1.3-2
mm (0.04-0.08 in.)
at the throttle grip flange or 10-15
deg. of the grip rotation.
To adjust, loosen the lock nut and tum the grip play
adjuster either in or out as necessary. Tum the adjuster in
the direction " A" to decrease the play, or "B" to increase
it.
Fig. 3-17
(1) Lock nut
(2) Grip play adjuster
Check the throttle cable far twisting or interference with
adjacent parts; also far proper routing, while tuming the
handlebar to each extreme.
Repair or, if necessary, replace the cable wi th a new one.
(1) Throttle cable
Fig. 3-18
CLUTCH
6.
Check the clutch lever for free play at its tIpo
Standard play: 10-20mm (0.4-0.8 in.)
Fig. 3-19
(I) Clutch lever
(2) Free play
Advertisement
