Gardena RP 300 Operating Instructions Manual page 5

G
Avoid dry operation Avoid dry operation of the pump as dry running will produce
undesirable heat and destroy the pump.
Only for WLP 300 S and WLP 300 B
Control / Setting of the Light Effect Jets
Water jet (WLP 300 S) The light effects can be controlled with the volume control of
the pump (➔ see "Operation").
Light sphere (WLP 300 B) Smaller diameters of light sphere:
.
Turn the light effect control anti-clockwise upwards
Bigger diameters of light sphere:
.
Turn the light effect control clockwise downwards.
20
Dismantling of the Light Effect Jets
Water jet (WLP 300 S) Disconnect plug transformer!
.
Remove the jet from the pump.
.
Pull off the top section of the jet of the light base.
.
Pull out the lamp.
.
Assemble the components in reverse order of the dismantling.
.
➔ While assembling take care that the cable of the lamp is
correctly inserted into the side slot!
Only 12 V halogen lamps of max. 5 watts may be used!
Light sphere (WLP 300 B) Disconnect plug transformer!
.
Take the jet out of the pump.
.
Unscrew the jet from the light base.
.
Pull off the bottom section of the light base.
.
Pull out the lamp.
.
Assemble the components in reverse order of the dismantling.
.
➔ While assembling take care that the cable of the lamp is
correctly inserted into the side slot!
Only 12 V halogen lamps of max. 5 watts may be used!
G
21