Configuration - Gilson pipetman User Manual

- PIPETMAN M battery won't charge or will not operate even if connected to the charger at least for
10 minutes.
- PIPETMAN M battery provides you very short cycle time or permanently needs to be used in con-
nected mode.
13

CONFIGURATION

Enter the menu using the Mode-button. You will find not only the pi-
petting programs (PIPET, REPETITIVE, MIX and REVERSE) and the speed
control but also the menu " CONFIGURATION", including " SERVICE" and
"ADJUSTMENT" (refer to Chapter 14).
The navigation of the menus is always done in the same way  Make
your selection by rotating the push-button, enter and confirm with
a simple click!
The configuration menu allows you to set up the following items:
1. Volume limit: Here you can fix the maximal volume of the pipette
(by default = nominal volume). For example you
have a P200M pipette, but you would like to use it with
your PIPETMAN DIAMOND Filter tips DF100, you can
set the maximal volume at 100 µL and you won't risk
contamination of your pipette.
2. Beeper: You can switch the tone of your pipette on or off.
3. Contrast: You can choose between values of 1 to 5 to set up the contrast of the screen.
4. Service see Chapter 14.
5. Adjustment see Chapter 14.
14
MAINTENANCE OF YOUR PIPETMAN M
PIPETMAN M requires very little maintenance. However, to ensure pipette accuracy, precision and
robustness for timeless use please proceed periodically with a Two-minute Inspection as recom-
mended by Gilson.
Your PIPETMAN M allows you to:
• Get service information.
• Readjust the pipette to user settings.
• Return to factory settings.
• Replace spare parts (for detailed information see Chapters 14 and 19).
• Prepare t he p ipette f or c leaning o r a utoclaving b y " disassembly" o f t he p arts s pecified ( see C hapter 1 5).
ENGLISH
- 17 -
Mode-button
Push-button