Gilson pipetman User Manual

Hide thumbs Also See for pipetman:

Download this manual

Cleaning and Sterilization

If your mood changes and you would like to change the label

or update pipette calibration, take the label off with water or

acetone. To reorder label sheets, please visit

Cleaning: Follow the cleaning procedures found in the

PIPETMAN® User's Guide.

Decontamination: Check that the decontaminant is

compatible with polypropylene plastic. Wipe PIPETMAN®

Comfort Handle with a soft cloth or lint-free tissue and rinse it

with distilled water before reassembling.

Autoclaving: Sterilize the two accessory elements as needed

at 121° C (252° F), 1 atm for 20 minutes. For more details

about autoclaving, refer to autoclaving procedures found in

the PIPETMAN® User's Guide.

FAQs and User's Guide are available at

gilson.com/contactus

All trademarks are the property of Gilson Inc. and its

subsidiaries.

www.gilson.com.

COMFORT HANDLE

User's Guide

Need help?

Do you have a question about the pipetman and is the answer not in the manual?

Page 1 121° C (252° F), 1 atm for 20 minutes. For more details about autoclaving, refer to autoclaving procedures found in the PIPETMAN® User’s Guide. FAQs and User’s Guide are available at www.gilson.com. gilson.com/contactus LT801548/C │©2023 Gilson SAS. All rights reserved. All trademarks are the property of Gilson Inc. and its subsidiaries.
Page 2 Attaching the PIPETMAN® Comfort Handle to Creating Your Custom Labels PIPETMAN® Models Each PIPETMAN® Comfort Handle is provided with pre-cut labels to write maintenance information, such as calibration date, or to let your Single Models imagination run free. Connect at www.gilson.com/pipetman-comfort-handle.html...