Inverter Models To Be Used With; Bulletin Of Materials - WEG CFW-11 Installation Manual

NOTE!
This guide provides information for the installation of KVDC kit on the CFW-11
inverter without the suffix W (CFW-11) or W1 (CFW70X) in their description.
The KVDC-CFW11-2 is an optional component of the inverter, therefore, it cannot be sold to
end users or integrators separately.
It must always be installed by the WEG branch or WEG distributor, otherwise, the end user will
lose the warranty for opening the inner parts of the inverter.

1 INVERTER MODELS TO BE USED WITH

Applicable to the following models:
CFW-11 frame size D 690 V.
„
CFW70X frame size D 600 V.
„
CFW-11 frame sizes F, G and H.
„

2 BULLETIN OF MATERIALS

(a) VDCx Electronic Board
(d) Insulation for the board
External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
(b) Metal Spacers
(e) Clamp for ribbon-cable
(c) Plastic spacers
(f) Plastic covers for
ribbon-cable connector
CFW-11/CFW70X | 5