WEG CFW-11 Installation Manual page 17

External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
Step Actions/Instructions
26
Only frame sizes F and G
Fit the ground cable to J7 connector on the power interface board (DFO2x).
Note: check the connection of J7-XC98 cable, between the power interface board (DFO2x)
and the control board (CC11x).
27
Frame size D Frame sizes F and G
Assemble the upper front Fit in the top front cover and pass the control rack through
cover. the opening on the cover.
28
Only frame size H
Connect the flat cable and fasten the screw of the safety stop board as indicated.
CFW-11/CFW70X | 17