WEG CFW-11 Installation Manual page 19

Step
32
Fit in the upper cover and fasten the two screws at the ends.
33
Fit in the lower cover and tighten the two screws at the ends of the lower front cover.
34
Fit in the front cover of the control rack, tighten the two screws and fit the HMI in.
Figure 2: Instructions to assemble the KVDC kit on the inverters with frame size D, F and G
External Power Supply for Control in 24 Vdc - KVDC-CFW11-2
Actions/Instructions
Only frame size H
Frame sizes D, F, G and H
Frame sizes D, F, G and H
CFW-11/CFW70X | 19