Adjusting The Step Sizes On Motorized Stages - Leica DMi8 Instructions For Use Manual

5. OPERATION - STAGES AND OBJECT DISPLACEMENT
5.6.2

Adjusting the step sizes on motorized stages

stage and focus controls. The X/Y coordinates of the cur-
rent stage position are displayed.
Stage menu using the
switching between the Coarse and Fine step sizes.
If the Coarse value is selected, the travel speed is the
same for all objectives.
The Fine value is adapted to the respective objective.
5.6.3 Saving and moving to stage positions
In the LAS X software, the programmed working area is
marked by a dashed line frame.
You can reset the working area to the
travel range via the Limits key.
52
key to switch to
key.
travel speed of the stage by
maximum stage
Working area restriction
1
2
3
Zero point
Current
stage position
Stored
stage position