Graco fire-ball 300 Instruction Manual page 6

101
102
d
3
Fig. 2
6 307880
Installation
Air Line and Accessories
Note: Install the air line accessories in the order
shown in the Typical Installation on page 5.
Do not hang air accessories directly on the air inlet.
103
The fittings are not strong enough to support acces-
sories and may cause one or more to break. Provide
a bracket on which to mount accessories.
D Install a pump runaway valve (G) to shut off the air
104
D Install an air line lubricator (F) for automatic air
D Install the air regulator (C) to control pump speed
Fire-Ball 300
pump shown
D On the main air supply line from the compressor,
Grounding
Proper grounding is an essential part of maintaining a
safe system. Read and follow the instructions in
8729B
Grounding on page 4.
CAUTION
to the pump if the pump accelerates beyond the
pre-adjusted setting. A pump that runs too fast can
be seriously damaged.
motor lubrication.
and pressure.
install an air line filter (E) to remove harmful dirt and
contaminants from your compressed air supply.