Hobby ONTOUR Operation Manual page 84

12:30 23,5 °C 18,0 °C
06.06.16
7. Installation of electrical devices
06.06.16 12:35
2
CAP 750
Version: 2.23
KATHREIN-Werke KG
Info:
http://kathrein.com
06.06.16
12:25
12:25
27,4°C
Einstellungsmenü
Datum
Uhrzeit
Temperaturo set
Wecker on/o
06.06.16
12:25
27,4 °C 26,4 °C
27,4°C 26,4°C
06.06.16
26,4°C
27,4°C 26,4°C
- 2 °C
06.06.16
+ 1 °C
12:25
12:30 23,5 °C
06.06.16
Dometic
Info:
Dometic Servicepartner
http://service-location.dometic.com
http://dometic.com
Info menu
Information on the device manufacturer is shown here.
Displaying the data in the fixed header A
This menu gives an overview of the data in the fixed header A. It
is only possible to exit this menu by using the "Back" function; it
does not automatically switch back to the main menu on the control
panel.
date
time
inside temperature
outside temperature
Settings menu (for data in the fixed header A)
The date and time can be set in the Settings menu. Use the control
knob or the left and right arrows to reach the desired value. Press the
control knob; it is then possible to change the values by turning the
knob (right = increase value; left = decrease value) or by using the
"+/-" function. Press the control knob to confirm the changed value.
Only then will it be saved.
It is also possible to calibrate the indoor and outdoor temperatures
shown, as temperature effects on the sensors may lead to a deviati-
on between the temperature displayed and the actual temperature.
The temperature display can be changed by a maximum of +/-12° C..
The alarm icon can be used to program the alarm. The time is also
set using the control knob or the plus and minus functions. The
alarm can be activated or deactivated using the left soft key.
Exit this menu by using the "Back" function; otherwise, after one
minute, it will automatically switch back to the main menu on the
control panel.
18,0 °C
80