Hobby ONTOUR Operation Manual page 117

1
6
7
8
9
Truma control panel "CP plus"
113
Operating and display controls
Display
j
Status line
k
Menu line (top)
l
2
Menu line (bottom)
m
3
Display: 230V mains voltage (charging current)
n
Display: timer
o
5
Settings / values
p
4
Adjusting knob / pushbutton
q
Reset button
r
The adjusting knob / pushbutton
in lines and
l
on the display
button to return to the previous menu.
r
Adjusting knob / pushbutton
The adjusting knob / pushbutton
specified values and parameters. The changes are saved by briefly
pressing the button. Selected menu items blink.
Turn to the right (+)
- Goes through the menu list from left to right.
- Increases the values.
Turn to the left (-)
- Goes through the menu list from right to left.
- Decreases the values.
Press the button briefly
- Saves a selected value.
- Selects a menu item; changes to the setting mode.
Press (3 seconds)
- Main function ON / OFF
- iNet-ready: use the adjusting knob / pushbutton to change the
function (see APP mode)
Reset button
Press the reset button r to return to the previous menu and reject
the settings. This means that the previous values will continue to
apply.
10. Built-in devices
q
and change the settings. The data is shown
m
; the background is illuminated. Use the reset
j
is used to select and change
q
is used to select the menus