Toyota PRIUS 2014 Owner's Manual page 190

2. SETUP
CHANGING THE Bluetooth
SETTINGS
®
The Bluetooth
changed according to the following
procedures.
■
CHANGING "Bluetooth* Power"
The "Bluetooth* Power" display shows
the following state.
When "Bluetooth* Power" is "On":
®
The Bluetooth device is automatically
connected when the "POWER" switch is in
ACCESSORY or ON mode.
When "Bluetooth* Power" is "Off":
®
The Bluetooth device is disconnected,
and the system will not connect to it next
time.
The "Bluetooth* Power" auto connection
state can be set on or off.
• "On": The auto connection is turned on.
• "Off": The auto connection is turned off.
The auto connection state cannot be
changed from "On" to "Off" while driving,
but it can be changed from "Off" to "On".
188
®
settings can be
1
Touch "Bluetooth* Power".
2
Touch "On" or "Off".
3
Touch "Save".
In the event the state of "Bluetooth*
Power" is changed from "Off" to "On",
®
Bluetooth connection will begin.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.