Toyota PRIUS 2014 Owner's Manual page 280

1. VOICE COMMAND SYSTEM OPERATION
4
Say "<street name>".
Say the desired full street name, or main
body of the street name that belongs to
the set state in the place of the "<>".
The voice command
designed to recognize the main body of
the official street name.
For example, if the official street name is
"East Main Street", the voice command
recognition will recognize "Main".
5
Say "<house number>".
Say the desired number, cardinal/intercar-
dinal direction etc. in the place of the "<>".
For example: Say "West 555".
Inputting the house number can be
skipped.
6
Say "Start guidance" or "Show
map". Alternatively,
Guidance" or "Show Map".
After this, follow the voice guidance and
search for a destination route by voice
command operation.
278
●
recognition is
●
touch "Start
●
INFORMATION
Even if the state set using voice recogni-
tion is different from the set state in the
"Address" screen (which was set when a
destination was set manually), the set
state in the "Address" screen will not
change. (For more information on the
"Address" screen, see "SELECTING
THE SEARCH AREA" on page 58.)
The house number voice recognition
conditions are outlined below:
• Numerals: 10 digits or less
• Numerals and cardinal/intercardinal
direction or a hyphen and numerals:
A total of 9 digits or less (Do not say
"and".)
• Cardinal/Intercardinal direction or a
hyphen and numerals: A total of 9
digits or less (Do not say "and".)
• Numerals are recognized as single
digits only.
• The cardinal/intercardinal direction
and hyphens are only recognized
once.
• The following cardinal/intercardinal
directions can be recognized: North,
East, West, South, North East, North
West, South East and South West.
When inputting the house number is
skipped and the recognized candidate
list has multiple entries and so forth, the
full street name may need to be recog-
nized. If this occurs, say the full street
name.
For example, say "East Main Street"
and "East Main Street" will be recog-
nized.