Toyota PRIUS 2014 Owner's Manual page 277

Saying "Help" prompts voice guidance
to offer examples of commands and
operation methods.
3
Say the command displayed on the
screen.
If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Touch "Go Back".
To cancel voice recognition, touch "Can-
cel", or press and hold the talk switch.
1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
●
If the navigation system does not
respond or the confirmation screen does
not disappear, press the talk switch and
try again.
●
If a voice command cannot be recog-
nized within 6 seconds, voice guidance
will say "Pardon?" ("Command not rec-
ognized." will be displayed on the
screen) and voice command reception
will restart.
●
If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
"Paused. To restart voice recognition,
push the talk switch. To cancel voice
recognition, push and hold the talk
switch." Then voice recognition will be
suspended.
●
The voice recognition prompt can be set
to on or off when "Voice Prompts" is
touched. This setting can also be
changed on the "Voice Settings" screen.
(See page 53.)
●
When "Voice Prompts" is touched,
voice recognition will be temporarily sus-
pended. Press the talk switch again.
●
Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk
switch and hearing a beep.
6
275