Toyota PRIUS 2014 Owner's Manual page 279

VOICE COMMAND EXAMPLE:
SEARCHING FOR A ROUTE TO
YOUR HOME
1
Press the talk switch.
2
Say "Go home".
A confirmation screen will be displayed
showing the recognition results.
3
Say "Yes" or touch "Yes".
The system starts searching for a route to
your home.
When the voice command is recognized,
the map of the area around the home
address will be displayed and route guid-
ance to the home address will begin.
If a home address is not registered,
voice guidance will say "Your home is
not set. Please try again after setting a
home location."
prompted to enter a home address.
(See page 99.)
and you will be
1. VOICE COMMAND SYSTEM OPERATION
VOICE COMMAND EXAMPLE:
PERFORMING A DESTINATION
SEARCH BY ADDRESS
(ENGLISH ONLY)
1
Press the talk switch.
2
Say "Enter an address".
If the destination's state/province has not
been set or is not contained in the voice
command recognition list, the screen to
input a state/province will be displayed.
Some areas cannot be recognized by the
voice recognition system.
For information regarding the state/
province setting to perform a destination
search by address, see "SELECTING
THE SEARCH AREA" on page 58.
3
Say "<city name>".
Say the desired city name that belongs to
the set state in the place of the "<>".
Say "Change State" to change the set
voice recognition state.
6
277