Installing The Dms2.5 - Samsung MIM–B18BN User & Installation Manual

Installing the DMS2.5

1 Separate the installation plate on the rear side of DMS2.5.
2 Fix the installation plate on the wall using 4 screws.
3 Hang the DMS2.5 on the groove which is on the top of
the installation plate.
4 Fix the installation plate and DMS2.5 using 2 screws.
Depending on the installation environment, fix DMS2.5
using assistant holes.
( Screws for assistant hole are not provided by our
company.)
5 If you install DMS2.5 inside of the wall or wiring from the rear
side is needed, use wiring groove on the bottom of DMS2.5.
To prevent breakdown and damage of DMS2.5, and for safe
usage, it is recommended to install DMS2.5 on the wall.
Installation
plate
Assistant hole
Wiring groove
13
E-