Parts - Samsung MIM–B18BN User & Installation Manual

Viewing LonWorks Gateway's Parts
Main Parts
LonWorks Gateway Exterior
LCD Display
Shows current time and IP address. Various
messages will be displayed depending on
button input.
LCD operation button
There are 4 buttons(Menu, (Down),
Set) and you can access menu and move,
check the menu.
LED Indicator
Check 15 LED status such as Power, CPU-Alive,
Ethernet-Linked/Active, COM1~4-TX/RX,
Lon ACK, Lon SVC and Check.
LonWorks Gateway Bottom cover
Unfasten 2 screws on the bottom and
separate the bottom cover from LonWorks
Gateway. Then check cable connection part.
● LED Indicator
Item
Power Power indicator
CPU Alive CPU operation indicator
Ethernet–Linked Internet connection indicator
Internet data transmission/reception
Ethernet–Active
indicator
Channel 1~4 OnOff controller/Outdoor unit
COM1~4 – TX
Data transmission Indicator
Channel 1~4 OnOff controller/Outdoor unit
COM1~4 – RX
Data reception Indicator
Lon ACK LonWorks data reception indicator
Lon SVC LonWorks device status indicator
Indoor/Outdoor unit/Communication check
Check
Indicator
(Up),
Name
Turns blue when the power is supplied.
Blinks in orange with 1 second
intervals during normal operation.
Turns green during normal connection.
Blinks in orange during normal
transmission/reception.
Blinks in green during normal
transmission.
Blinks in green during normal
reception.
Blinks in green during normal
reception.
Blinks in green during un-configured.
- Needs commission by integration
Turns green when notice occurs.
Status
tool (Ex. LonMaker)
69
E-