Samsung MIM–B18BN User & Installation Manual page 50

BACnet Gateway setting (Continued)
50
E-
Setting the BACnet Gateway
BACnet Gateway Connection and Login
1
Click internet explorer icon(
2
When internet explorer window appears, enter IP address
(https://192.168.0.100) on the address bar then press
[ENTER].
If it is the first time to access BACnet Gateway, " Install
3
Microsoft Silverlight" message will appear.
If the Microsoft Silverlight has already been installed, the
above message will not appear.
4 Click [Run] button and continue installation.
After installation, access BACnet Gateway again.
Silverlight operates normally with Windows 7 or later
version. It may not operate normally with previous version
of Windows.
5 Enter ID and password when BACnet Gateway main web
page appears, Then click [LOGIN].
If you use accounts with general authorization level to
login, you cannot use the BACnet Gateway settings.
Depending on authorization level set by the
administrator, access to some functions may be
restricted.
You can change authorization level settings from
System settings
To use the BACnet Gateway functions, you must login
with the ID that is included in administration group.
Factory default BACnet Gateway ID is 'admin' and
password is 'ac0530' .
Note Only authorized users can access web page.
Connection speed may slow down. Fewer than 5
concurrent users are recommended.
BACnet Gateway manager should change ID and
password for security and management.
Logout: If you want to logout, click [LOGOUT] on the
top of the menu. BACnet Gateway will be ended.
) twice on your computer.
User authorization management.