Safety Precautions; Cautions For Operation - Samsung MIM–B18BN User & Installation Manual

Safety Precautions

Cautions for operation

Before using the DMS2.5, BACnet Gateway, LonWorks Gateway, read carefully these instructions.
After reading the instructions, keep this user's manual in a handy and safe place.
If a user is changed, you must hand over the manuals.
Never attempt to install the air conditioning system or to move the product by yourself.
WARNING
CAUTION
Cautions for installation
This user & installation manual describes how to install the DMS2.5, BACnet Gateway, LonWorks
Gateway. For installation of other optional accessories, refer to the appropriate installation manual.
WARNING
CAUTION
2
E-
English
Do not attempt to install or repair the product by yourself.
The product contains no user-serviceable parts. Always consult authorized
service personnel for repairs.
When moving, consult authorized service personnel for disconnection and
installation of the product.
Ensure that the wall is strong enough to support the weight of the product.
Must install the product with rated power supply.
In the event of a malfunction (burning smell, etc.), immediately stop
operation, turn off the electrical breaker, and consult authorized service
personnel.
Do not use inflammable gases near the product.
Do not spill water into the product.
Do not operate the product with wet hands.
Do not install the product in a location where it will come into contact with
the combustible gases, machine oil, sulphide gas, etc.
Do not press buttons with a pointed thing.
Do not pull or bend the product cable excessively.
Do not use the product for other purpose.
Do not spray an insecticide or other combustible things on the product.
Do not clean the product with benzene, solvents or other chemicals.
Do not give a shock to the product or disassemble it by yourself.
Read carefully this user & installation manual before installation and check if
the product is installed correctly after installation.
Do not attempt to install or repair this product by yourself.
This product contains no user-serviceable parts. Always consult authorized
service personnel for repairs.
When moving, consult authorized service personnel for disconnection and
installation of the product.
Ensure that the wall is strong enough to support the weight of the product.
Must install the product with rated power supply.
The product must be installed according to the national electrical rules by an
installation specialist.
If you wish to uninstall the product, consult an authorized installation center.
Do not use inflammable gases near the product.
Do not install the product in a location where it will come into contact with
combustible gases, machine oil, sulphide gas, etc.
Avoid locations where acid/alkali solution or special spray is used.
Choose a location that is dry and sunny, but not exposed to direct sunlight.
Suitable temperature is between 0°C(32 °F) and 39°C(102.2°F).
Do not spill water into the product.
Do not apply tensile strength to the cable to avoid cable damage.
Do not press buttons with a sharp object.
Do not connect the power cable to the control terminal.
If the product is installed in a hospital or other special places, it should not
affect other electronic devices.