Table of Contents
Advertisement
Installing the Wi-Fi Kit
Wi-Fi Kit installation
• To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router
that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are
CAUTION
potentially interfering elements between them, it may cause problems with the performance of the
Wi-Fi Kit that cannot be resolved by customer services.
• Place the Wi-Fi Kit in an area where you can easily press the AP button for device verification.
• Do not install the Wi-Fi Kit in an area where it may be exposed to moisture or impact.
• Operating temperature: 0-40 ℃, Operating humidity: 30-90 % (relative)
1. Use a flathead screwdriver to turn each of the square holes at the lower part of the Wi-Fi Kit and remove
the back cover.
※ Push both latches at the same time.
• Use a flathead screwdriver to turn the rectangular hole at the upper
part of the fixing hook for easy removal.
NOTE
2. Arrange the power and communication cables along the back cover.
6
<Wires installed on the wall>
15 cm
If necessary, remove
this part to secure
more space for wiring.
10 cm
<Wires installed in the wall>
Advertisement
Table of Contents
