JDE Cafitesse 120 Next Generation Operator's Manual page 46

l.6 P R O G R A M M I N G T H E D I S P E NS E R
Activate/deactivate.service.number
1. Use the arrow buttons
navigate to the sub menu «SHOW
SERVICE NR».
2. Press the enter button
access the sub menu.
The display shows the settings for «Y»
(Yes) or «N» (No).«Y» or «N» flashes
and is active:
SHOW.SERVICE.NR.:.
3. Use the arrow buttons
«Y» to activate the number display
or «N» to deactivate the number
display.
4. Confirm with the enter button
The new setting will then be displayed
continuously on the display, e.g.:
SHOW.SERVICE.NR.:.Y
• Press the enter button
you would like to restart the setting.
46
Enter.the.operator.number
1. Use the arrow buttons
to
navigate to the sub-menu
«OPERATOR NR».
2. Press the enter button
to
access the sub menu.
The display shows the operator
telephone number. The first digit is
active and flashes:
N
Note:
to select
O = operator, S = service
3. Enter the first digit using the arrow
buttons
.
4. Confirm with the enter button
The first digit is displayed continuously,
the second digit is activated and starts
flashing.
again, if
5. Repeat steps 3. and 4. until you
have input the last digit of the
telephone number.
6. Confirm the complete telephone
number with the enter button
• Press the enter button
you would like to restart the setting.
to
to
O:. 0 301234567
.
.
3
O:.5 01234567
.
again, if
Enter.the.service.number
1. Use the arrow buttons
navigate to the sub-menu
«SERVICE NR».
2. Press the enter button
access the sub menu.
The display shows the operator
telephone number. The first digit is
active and flashes:
S:. 3 18051234567
Note:
O = operator, S = service
3. Enter the first digit using the arrow
buttons .
4. Confirm with the enter button
The first digit is displayed continuously,
the second digit is activated and starts
flashing.
1
S:.0 8051234567
5. Repeat steps 3. and 4. until you
have input the last digit of the
telephone number.
6. Confirm the complete telephone
number with the enter button
• Press the enter button
you would like to restart the setting.
to
to
.
.
again, if
2014 - 03