JDE Cafitesse 120 Next Generation Operator's Manual page 44

l.6 P R O G R A M M I N G T H E D I S P E NS E R
Setting.the.start.time.
(when.status..«ECO.ENABLED»)
1. Use the arrow buttons
navigate to submenu «ECO END».
The ECO END time is shown on the
display.
2. Press the enter button
access the «ECO END» sub menu.
The option „Hour" flashes and is
active:
3. Use the arrow buttons
the correct time (hours).
4. Confirm with the enter button
The option „minutes" flashes and is
active:
5. Use the arrow buttons
the correct time (minutes).
6. Confirm with the enter button
The new ECO END time is shown
continuously on the display.
• Press the enter button
you would like to restart the setting.
44
Setting.the.temperature.
(when.status..«ECO.ENABLED»)
to 1. Use the arrow buttons
navigate to sub menu «ECO
TEMP».
The ECO TEMPERATURE is shown
on the display.
to
2. Press the enter button
ECO.END.
access the «ECO TEMP» sub
05
:55
menu.
to select
The temperature setting flashes on the
display:
.
3. Use the arrow buttons
ECO.END.
the desired temperature.
55
06:
4. Confirm with the enter button
to select
The new temperature is shown
continuously on the display, e.g.:
.
again, if
• Press the enter button
you would like to restart the setting.
to
ECO.TEMPERATURE.
63.°C./.145.°F
to
ECO.TEMPERATURE.
63.°C./.145.°F
to select
.
ECO.TEMPERATURE.
75.°C./.167.°F
again, if
Note:
When the energy saving mode is
active, the «ECO» icon is shown
on the display of the dispenser.
ECO
2014 - 03