Malaguti f10 Service Manual page 36

• V -
• V2 -
• Lateral air conveyor,
paying attention to the
hook element positioned
in the lower part of the
conveyor itself.
F.74
• Release the rear brake
transmission cable by
operating on the nut (D).
• Unscrew the lower locking
screw (V) of the shock
absorber.
• Rotate the suspension
upwards and anchor it to
the scooter frame.
• Remove the stand (p. 30).
F.76
• Disconnect the
carburettor accelerator
wire.
• Disconnect the mixer
wire (A) from the cam
(B) that drives the oil
mixer.
When reassem-
bling the wire,
make sure the two
notches (C), one
on the cam and
one on the guard,
are aligned. To
adjust, use the ring
nut (D).
• Unscrew the locking nut
(D) and slide the pin out
(A).
Cs - N * m
D
62 ± 15 %
35 03/08
F.75
F.77