Checking - Malaguti f10 Service Manual

CHECKING

Materiale di attrito
• Control the conditions of the brake shoes, verify the minimum
thickness of the friction material, which should't be thinner then
mm 2, otherwise, replace the shoes.
Drum
• Clean carefully the inner part of the drum, verifying that there are
no clearly visible scores or damages. Otherwise proceed with
the replacement of the rear rim.
BRAKE LEVER ADJUSTMENT
• Pull the lever verifying that the brake begins working, after an idle stroke of
the lever of about 10 mm.
• If necessary, carry out adjustment by acting on the adjustment nut (D).
• Rotate the wheel manually, operating for different times the brake lever
verifying the idle stroke, the braking efficacy and the free rotation of the
wheel, after having released the lever itself.
After the adjustment, verify that the adjustment nut thread is not com-
pletely employed up to the end of the thread itself (that would mean
that the brake shoes are completely worn out).
F.64
F.65
32 03/08
F.66