Step 1 Thrning The System On; Step 2 Self Test; Step 1 Turning The System On - Toshiba T1100 PLUS User Manual

OPERATING THE T11
D
The MS-DOS system diskette is at hand.
D
Several blank
D
Any external options such as a 5 1/4" diskette drive or a printer are
connected and on.
Step 1. Turning the System On
If you are using an external drive or printer, tum it on before turning on
the computer.
Tum the system on by setting the on/off switch to the on position. The
screen darkens for a few seconds then returns to normal.
If you turn the computer on and see no change on the
screen, the battery may not be sufficiently charged.
Turn the computer off and recharge the battery for five
minutes.
computer with an AC adapter, you must charge the
battery for at least five minutes.
If the computer sti/l does not come on, refer to Chapter
9,
'Diagnostics.'
Step 2. Self Test
When the computer is turned on, it automatically performs a self test
indicated by the following message in the top left-hand comer of the
screen:
MEMORY
This is a test of the computer's memory. The message remains on the
screen for several seconds
amount of memory in the computer (640K bytes or 256K bytes).
S{2
PLUS/Chapter
00
3
1/2" diskettes are available.
NOTE
Remember: even if you are using the
TEST xxx KB
the
as xu
5
increases until it equals the
-
,... .
-
-
-
--
-
.... .
-
-