Step 10 Testing The Hard (Fixed) Disk Drive; Step 11 Testing The Printer - Toshiba T1100 PLUS User Manual

Step 10. Testing the Hard (Fixed) Disk Drive
If you did not choose the
beginning of the diagnostics test program, this test does not run and the
test designated next begins.
If you chose the HDD
next phase. This test determines if a problem you are experiencing lies
with a fixed disk connected to the
chassis.
The following message appears on the screen:
H A R D D I S K
If the hard disk drive test does not run or an error message appears,
write down any messages displayed and take the computer, expansion
chassis and fixed disk for servicing.
Step 11. Testing the Printer
If you did not choose the printer test option at the beginning of the
diagnostics test program, the diagnostics menu appears on the screen.
If you choose the printer test option, the following message appears on
the screen:
PR IN T E R T ES T
If the print test does not run or an error message is displayed, take the
following diagnostic steps:
1
Check that the printer's power cord is connected to a working
wall outlet.
2
Make sure the printer's power switch is
3 Check that the printer's cable is properly connected.
9{l4
Chapter 9
(hard disk drive) test option
HDD
test option, the system automatically begins the
Tll00 PLUS
IN PROGRESS
IN PROGRESS XXXXXX
through the expansion
xxxxxx
turned on.
at the
-
,-.
I