Clock Errors; External Drive Errors - Toshiba T1100 PLUS User Manual

Clock Errors

If you do not encounter any errors in loading MS-DOS, the cursor is
positioned next to the message:
Enter new date (rnrn-dd-yy):
Enter the date (see Chapter
Enter.
time) and press
Current time is 0:00:14:32
Enter new time:
Enter the time and press
screen. The operating system is ready to receive further instructions.
If the clock does not keep the correct date and time, take the following
diagnostic steps:
I
Make sure you are booting from the MS-DOS system disk that
came with the computer.
2
Reset the date and time using the MS-DOS DATE and
commands.
If
problems persist, take the computer to your dealer for servicing.

External Drive Errors

If you are using an external
unable to access the drive properly, take the following steps:
I
Check that the cable connecting the external drive to the
PLUS is properly connected.
reversed.
2
Make sure the power switch to the external drive is on.
Chapter
5
for instructions on how to enter date and
The computer displays:
Enter.
The system prompt appears on the
5 1/4"
diskette drive or fixed drive and are
Make sure the ends are not
TIME
TIl 00
9/9