Inserting And Removing 3 Y2" Diskettes - Toshiba T1100 PLUS User Manual

-
.
-
.....
-
-
-
.....
-
-
I
-
-
-
-
Chapte r 4 DISK DRIVES AND DISKETTES
Inserting and Removing 3 1/2" Diskettes
Figure 4/B shows the correct way to insert a 3 1/2" diskette into the
drjve. Follow these steps:
1 Hold the diskette with the insert-arrow side up. Your fingers
should be holding the label with the metal protective cover
pointing away from you.
2 Insert the diskette into the diskette insertion slot. When it is
almost in, there is a slight resistance. Give the diskette a gentle
push to secure it frrmly in the drive.
3 Press gently down on the diskette inside the slot to ensure it is
frrmly in place.
NOTE
If you insert the diskette upside down or back to front, it
does not completely enter the diskette drive, but keeps
popping out.
Do not attempt to force
a
diskette into or out of the
drive. If it does not go in easily, take it out and check
that you are inserting it proper/yo If it does not come out
easily, have it removed by
a
trained repair person.
Be sure to perform Step
3.
If you do not do so, you may
experience
a
read error when attempting to access the
diskette.
Remove the diskette by pressing the diskette eject button. The diskette
pops halfway out for easy removal by hand. Store it in a diskette
storage box.
4/9