System Indicators - Toshiba NB205 Series User Manual

System indicators

The LED system indicators for specific computer operations glow when
those operations are in progress.
Wireless
communication
Wireless WAN
communication
DC IN
Power
Battery
HDD
Bridge media slot
User's Manual
Figure 2-2 System indicators
The Wireless/Bluetooth indicator glows amber
when the computer is enable to connect wireless
LAN, Bluetooth or wireless WAN.
The Wireless WAN indicator glows blue when
the computer is enable to connect wireless WAN.
The DC IN indicator normally glows white when
power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will go
out.
The Power indicator normally glows white when
the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will flash amber - approximately one second on,
two seconds off - both while the system is
shutting down and while it remains turned off.
The Battery indicator shows the condition of the
battery's charge - white indicates the battery is
fully charged, amber indicates the battery is
charging, and flashing amber indicates a low
battery condition. Please refer to Chapter 6,
Power and Power-up Modes
on this feature.
The HDD indicator glows white whenever the
computer is accessing the built-in hard disk drive.
The Bridge media slot indicator glows white
when the computer is accessing the Bridge
media slot.
The Grand Tour
for more information
2-2