Real Time Clock - Toshiba NB500 User Manual

Real Time Clock

Problem
The following
message is
Displayed on the
screen:
ERROR 0271: Check
date and time
settings.
WARNING 0251:
System CMOS
checksum bad -
Default
configuration used.
Press <F1> to
resume, <F2> to
Setup.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the section
Operating Basics, for further information.
Problem
Some letter keys
produce numbers
Output to screen is
garbled
Downloaded from LpManual.com Manuals
User's Manual
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the following
steps:
1. Turn on the computer.
2. Press the F2 key when the TOSHIBA Leading
Innovation >>> screen appears - the BIOS
setup application will load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 - a confirmation message will be
displayed.
6. Press the ENTER key - the BIOS setup
application will end and the computer will
restart.
The Keyboard
Procedure
Check that the numeric keypad overlay is not
activated - press the FN + F11 hot key and try
typing again.
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.
in Chapter 3,
6-7