Samsung SHP-DS510 User Manual page 9

6. Fix Screw for the Interior Unit
REG SET REG SET
Left-handed
7. Final Check
1
REG
3
OPTION : Connection for Video Intercom
REG
REG SET
Right-handed
C B
REG
G4
B J
2
SET
Dry Contact
Signal
SET
1. Before installing the interior unit, check the
direction of the thumb turn while the dead bolt is
in the OPEN POSITION.
REG SET
2. Open the battery cover.
3. Align the Interior Unit on to the Interior Mounting
Plate, and attach it with 3 screws.
CAUTION: Check the movement of the dead bolt
by the thumb turn.
SET
G3
1. Install 4 batteries. A Melody will sound
2. Close the door to detect the door
3/4˝(20mm)
REG
3. Stick the door sensor with attention
REG SET
CAUTION: The gap between the door
sensor and the magnet should be close
enough to be detected.
Connect the cable of video intercom to the
Interior Unit.
SHP-DS510 receives 1 second of dry con-
tact signal to open the door remotely.
It is normally compatible with SHT-3006 and
other Samsung Video Intercom systems.

SHP-DS510
Smart
Door Lock
when all 4 batteries are installed
correctly.
sensor. You can hear the beep sound
when the door sensor detects the
magnet. After that, press [OPEN/
CLOSE] button to check whether the
dead bolt works properly.
on the distance.