Door Preparation - Samsung SHP-DS510 User Manual

|

Door Preparation

Step 1. Check the Door Status
1) This lock supports door thickness of 1-3/8" to 2-5/32" (35 to 55mm).
2) Using the provided lock template, ensure that there are no obstructions that would prevent
installing the lock properly.
3) Take note of which orientation the deadbolt will need to be installed, left hand or right
hand.
Left-handed Door
When viewed from the
Outside, the hinge is on the
left.
Min. 50mm
Step 2. Mark on the Door
Check the location and direction of the deadbolt, attach the drilling template (page 27) on
the side of the door, and mark on it with a pen.
1) Align the horizontal line across the door.
2) Align the vertical line over the door.
3) Mark the centers of the holes with the drilling template.
4) Mark the centerline of the deadbolt by aligning it with the
vertical line.
Please, be aware of that there has be more than
50mm gap between the door frame.

SHP-DS510
Smart
Door Lock
Right-handed Door
When viewed from the Outside,
the hinge is on the right.