Installing Lock - Samsung SHP-DS510 User Manual

Installing lock

|
Outside
A
E
H
1. Installing the Dead Bolt(E)
E
G1
2. Installing the Exterior Unit
D
A
E
H
C
D
1. Before installation
1) Check the faceplate type of your door.
2) Make sure the deabolt directon as shown before
inserting it into a door side.
2. Insert the deadbolt from the side of the door.
3. Fix the deadbolt using two FH+T4X19 screws.
* If there is round strike hole, change the faceplate, and
insert the deadbolt following right side drawing.
Left-handed
1. Ensure the Exterior Unit is aligned with the center hole of
the deadbolt and Cut the tailpiece 5mm longer than the
door thickness(refer to the page 31).
2. Attach the exterior unit.
CAUTION: The dead bolt must be in a retracted position.
D
In case of right-handed door, insert the tailpiece vertically.
In case of left-handed door, insert the tailpiece horizontally.
Inside
B
REG
F
G2
Right-handed

SHP-DS510
Smart
Door Lock
SET
G3
G4
D
J