Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SHP-A30
Summary of Contents for Samsung SHP-A30
- Page 1 Samsung SDS Digital Door Lock User Guide SHP-A30 Please review all included documentation and use the product as intended. Before installing this product, fully read and understand this user guide. Safety precautions must be followed to avoid personal injury or property damage.
- Page 2 Samsung SDS Digital Door Lock Introduction Congratulations on the purchase of your Samsung SDS Digital Door Lock! Your lock has a touch sensitive number display pad. Up to 50 users can be registered to gain access with unique Codes. The touchscreen makes it convenient to enter the code and the Randomizer function helps prevent lockpicking using fingerprint traces on the touchscreen.
-
Page 3: Safety Cautions
SHP-A30 Samsung SDS Digital Door Lock Safety Cautions Warning: This section contains important information to ensure the user’s safety and prevent potential damage to property. Please, read this section carefully and use the product accordingly. Caution when Installing Product It is not recommended to install this product in a rainy, humid, or salty place (e.g. coastal area), or a place exposed to direct sunlight for a long period of time. - Page 4 SHP-A30 Samsung SDS Digital Door Lock Keep a distance of 20 cm or further when using this product. Do not scratch the fingerprint recognition component with a metal object such as a coin, key, or necklace. If your finger or the fingerprint recognition component is dirty or wet, wipe it clean to remove any moisture before using the sensor.
-
Page 5: Installation
Batteries Battery Bracket User Manual Cover Pin Samsung SDS Digital Door Lock User Guide SHP-A30 Please review all included documentation and use the product as intended. 매뉴얼을 제대로 읽은 후 제품 을 설치하세요. Safety precautions must be followed to avoid personal injury or property damage. -
Page 6: Door Preparation
SHP-A30 Samsung SDS Digital Door Lock Door Preparation Step 1. Check the Door Status 1) This lock supports door thickness of 1-3/8” to 2-5/32” (35 to 55mm). 2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly. - Page 7 SHP-A30 Samsung SDS Digital Door Lock Step 3. Drilling 1) Drill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw. 2) Drill a 1˝ (25 mm) mortise hole using a hole saw.
-
Page 8: Preparing The Parts
SHP-A30 Samsung SDS Digital Door Lock Preparing the parts 1. Adjusting the length of the dead bolt Turn the body of the dead bolt to adjust the length of the dead bolt. It can be 60mm (2-3/8”) or 70mm (2-3/4”) 2. -
Page 9: Installing Lock
SHP-A30 Samsung SDS Digital Door Lock Installing lock Outside Inside Caution when Installing Product Before installing an IoT door lock, check your wireless environment. Depending on the indoor wireless environment, an IoT door lock may not be installed or its service may not be supported. To check your wireless environment, you need a smartphone and a wireless access point (AP) in your house. - Page 10 SHP-A30 Samsung SDS Digital Door Lock 2. Installing the Exterior Unit 1. Ensure the Exterior Unit is aligned with the center hole of the deadbolt. 2. Attach the exterior unit. CAUTION: The dead bolt must be in a retracted position.
- Page 11 SHP-A30 Samsung SDS Digital Door Lock 5. Fix Screw for the Interior Unit 1. Before installing the interior unit, 1) Check the direction of the thumb turn while the dead bolt is in the OPEN PO- SITION. 2) Check if the knob of the interior unit is placed at the center.
-
Page 12: Programming Features
SHP-A30 Samsung SDS Digital Door Lock PROGRAMMING Programming Features Exterior Interior Low Battery WiFi Module Indicator (Option) [Open/Close] Button Operation LED [REG] Button Fingerprint Recognition part Privacy/Lockout Mode Indicator Thumbturn Lever Touchscreen External Power Contact Restart Button Battery Cover Symbols... - Page 13 SHP-A30 Samsung SDS Digital Door Lock Symbols Description Symbols Description Place the finger on the Repeat the process inside fingerprint sensor the rectangle. Enter the User Number. Can be Press the [OPEN/CLOSE] OPEN / CLOSE set from 1 to 50.
- Page 14 SHP-A30 Samsung SDS Digital Door Lock Registration Button : This button is used to change Master PIN Code/User PIN Codes/User Fingerprints or the lock settings. It is found below the battery cover of the Interior Unit. The length of time the [REG] button is pressed varies depending on the function.
-
Page 15: Basic Lock Operation Overview
SHP-A30 Samsung SDS Digital Door Lock Basic Lock Operation Overview Opening the Door with a PIN Code → The door opens within one Enter the PIN Code and Touch the [Touchscreen]. second. press the button. Opening the Door with a Fingerprint →... -
Page 16: Status Indicators
SHP-A30 Samsung SDS Digital Door Lock Status Indicators Privacy Mode Indicator Low Battery Indicator Changing the Master PIN Code Changing Master PIN Adding User PIN 1~50 Open the battery cover of the When the touchscreen is il- Press the [ ] button after... - Page 17 SHP-A30 Samsung SDS Digital Door Lock Managing User PIN codes Adding a User PIN Code When the touchscreen is il- Open the battery cover of Press the button after the Interior Unit and press luminated, enter the current pressing the...
- Page 18 SHP-A30 Samsung SDS Digital Door Lock Deleting a User PIN Code Changing Master PIN Open the battery cover of When the touchscreen is il- Press the button after Adding User PIN 1~50 the Interior Unit and press luminated, enter the current...
- Page 19 1~50 SHP-A30 Samsung SDS Digital Door Lock Delete All User PIN Deleting All User PIN Code Fingerprint Register Fingerprint Delete a Fingerprint 1~50 Fingerprint Open the battery cover of When the touchscreen is il- Press the button after the Interior Unit and press...