Electrical Wiring Diagram-Usa; High Altitude Installations - Schwank X-Series Installation & Owner's Manual

Luminous gas fired infra red heaters
Table of Contents

Advertisement

8.8 ELECTRICAL WIRING DIAGRAM FOR THE LUMINOUS HEATERS
USA WITHOUT EXHAUST FAN INTERLOCK
DIAGRAM 11:

9. HIGH ALTITUDE INSTALLATIONS

Canada: All Luminous heaters are approved for
altitudes zero to 2000 ft above sea level. If in-
stalled at 2000 ft to 4500 ft above sea level the
heater must be ordered as High altitude.
Contact Technical Services at 1-866-361-0417
for further information.
USA: If a heater is to be installed at altitudes
above 2000 ft, the input must be reduced by 4%
per 1000 ft. Some gas utilities de-rate the heat
content in the gas supply to suit local conditions
and no modification of the heater is required.
If the gas supply is not de-rated, then the orifice
must be changed.
Contact your local gas utility regarding the de-
rating requirements of this appliance.
Contact the manufacturer's Technical Services
at 1-877-446-3727 for orifice sizing.
Page 11
GP-MECX-CX-1A
eco-X / IL-X Manual
RD: SEPT 2005
RL: 1A
BA

Advertisement

Table of Contents
loading

Table of Contents