GRAUPNER mz-24 PRO Manual page 17

INNOVATION & TECHNOLOGY
Press [ = ] to enter the new name into the New Model Name field at left:
_
Select the WIZ. button to advance to the next screen.
Select the model type by pressing the icon. The following images correlate
to the AIRPLANE mode:
Note: servo channels
are defined on each
Choose the wing type and number of servos used for ailerons and flaps.
icon on this display
(Press the NORMAL button to change the wing type to DELTA.) Select the
screen.
appropriate aileron/flap button that corresponds with the number of
aileron and flap channels needed for the model. If you use a Y-cable for
your ailerons and flaps, then the appropriate choice would be the (1A1F)
button, and so on. (Refer to the icons or the Model Type menu for servo
connection details.) For this example, the 2AILE2FLAP button was
selected.
17 / 34
S1006.PRO_mz-24_PRO_EN USA_V1