Brother D800W User Manual page 32

Printing a Label Using the P-touch Labelling Machine Keyboard
b
Position the cursor where you want to insert serialised text, and then press the Serialize key.
c
Select [Type], [Format], [From], [To] and [Increased by] using the
using the or
Note
You can also set [From], [To] and [Increased by] by typing in the numbers you want.
Example: [Type]: Normal, [Format]: 000-999, [From]: 1, [To]: 4, and [Increased by]: 1
See the following Serialise Settings table (factory settings are shown in bold):
Attribute
Type
Format Normal
Octal
Hex
Alphabet
From Normal
Octal
Hex
Alphabet
To Normal
Octal
Hex
Alphabet
Increased
by
key.
Value
Normal, Octal, Hex,
Alphabet
000-999, __0-999,
000-777, __0-777,
000-FFF, __0-FFF,
a-z, A-Z
000-999
000-777
000-FFF
a-z, A-Z
000-999
000-777
000-FFF
a-z, A-Z
1-9
Description
Specifies the format of the serialised number from
decimal, octal, hexadecimal, and alphabetic.
0-999 Specifies how the digits of the serialised numbers
are aligned.
0-777
 000-***: Zeroes are used to align the digits.
0-FFF
 __0-***: Blank spaces are used to align the digits.
 0-***: The digits are not aligned.
Specifies lower-case or upper-case characters.
Specifies the starting text for the serialised numbers.
Specifies the ending text for the serialised numbers.
Specifies the increment for increasing the serialised
numbers.
or key, and set the values
2
21